CarPlay installation tutorial for VOLVO V40 2012-2019

In this tutorial we'll show you how to install Apple CarPlay on a VOLVO V40 2012-2019.

Tools required: a T20 torx screwdriver.

Installation time: 15-30 minutes

Inventory: CarPlay module and wiring.
This includes the CarPlay module for Volvo, a Wi-Fi antenna, 1 LVDS (video) cable, the power cable, and a USB cable (no need to plug it in if you're using the device wirelessly).

STEP 1: DISASSEMBLE THE CAR RADIO

Simply remove the gearshift cover, either by hand or with a tool.

Remove the 2 Torx T20 screws.

Then pull the fan unit towards you, it's just clipped in place.

Remove the green connector and lay the fan unit aside.

There are still 2 Torx T20 screws.

Simply slide the center console aside, and remove the 2 Torx T20 screws holding the car radio.

STEP 2: WIRING

Then remove the QUADLOCK power connector (left) and the blue video connector (LVDS).

Make a By-pass with the LVDS video connector, and the same with the QUADLOCK (power connector).
NB: If you have a fiber optic cable (the 2 orange cables on the original power connector), you'll need to remove it and put it back in the set (on the new wiring).

The easiest way is to pull the cables from the right-hand side and store the CarPlay module under the carpet.

STEP 3: TEST

Press the EXIT button on your steering wheel for 2-3 seconds.

The menu appears, select what you want to use: Apple CarPlay, Android Auto or Mirror Screen.

We've chosen Apple CarPlay, which will launch by default (without the previous menu). To choose Android Auto, for example, go to the HOME application.

Our module: Apple CarPlay for VOLVO V40

Your cart is currently empty.

CarPlay installation tutorial for VOLVO V40 2012-2019

CarPlay installation tutorial for VOLVO V40 2012-2019

STEP 1: DISASSEMBLE THE CAR RADIO

STEP 2: WIRING

STEP 3: TEST

Leave a comment